B-52 MATRIX-2000 Portable 1200W Powered PA System (Special)

B-52 MATRIX-2000 Portable PA System. 1200-watt active three-piece portable PA System, with extremely high level sound output.

The MATRIX-2000 is a complete sound reinforcement solution consisting of two 12" two-way speakers and an 18" subwoofer, equipped with a built-in 1200-watt three-channel amplifier. The three-channel amplifier houses all the electronics required to run the system including electronic crossovers, equalization and compressors. The electronic circuity is fine tuned to match all of the components for the best possible sound.
The MATRIX-2000 is designed for easy operation, as you do not need to tweak frequencies or finesse levels. To set-up the system’s components, simply connect the XLR right and left signal cables, speaker cables and power cord and you’re ready to go!

SUGGESTED APPLICATIONS:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio / Video * Home Entertainment System * Live Sound System * Stage Monitoring System * Booth Monitoring System * Drum Monitoring

BUILT-IN 3-CHANNEL AMPLIFIER
The 18" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the cast-framed, 4" voice coil, 18" subwoofer. The rear chamber houses all of the system’s electronic circuitry, which includes the amplification for all three components, power supply, compressor and preamps. The 18" subwoofer has a power handling capability of 600 watts and a nominal impedance of 8 ohms.

12" TWO-WAY SPEAKERS:
The 12" two-way speakers are loaded with B-52 custom designed 12" loudspeakers and 1“ titanium diaphragm compression drivers, mounted to 900 x 400 constant directivity horns. The speakers are designed to be pole mounted, sit as stage monitors and have built-in (3/8" – 16 TPI) flying hardware for permanent installations. The front panel of the two-way speakers are convex so as to fit perfectly on to the subwoofer’s front grille. Each two-way speaker has the power handling capability of 300 watts and a nominal impedance of 4 ohms.

TRANPORTING THE SYSTEM:
Move the subwoofer onto its casters and place the included cover over the subwoofer. Next, pull the included covers over the satellite speakers and close the zippers. It is recommended that you transport the subwoofer and satellites separately. You may transport all the components at the same time by placing the satellite speakers onto the subwoofer’s front panel facing down. Secure the satellite speakers to the subwoofer with the included locking strap by fastening it to the bar handles on the side of the subwoofer cabinet.

SPECIFICATIONS:

1200-WATT 3-CHANNEL AMPLIFIER
Subwoofer Power Output: 600 W / 8 Ohms
12" Two-Way Power Output: 2 x 300 W / 4 Ohms
Line in: XLR Female
Parallel out: XLR Male
Input Impedance: 48 k Ohms
Speaker Out: Speakon NL4 Style Connector
Power Requirement: 230V<>50/60Hz<>5A
Crossover Frequency: 120 Hz; 24 dB/ Octave

18" SUBWOOFER
Speaker: 1 x 18" Cast-Framed, 4" Voice Coil Custom Subwoofer
Nominal Impedance: 8 Ohms
Subwoofer Freq. Response: 30 - 120 Hz
Sound Pressure Level (1w/1m): 129 dB
Maximum SPL: 130 dB
Weight: 160 lbs
Dimensions (Transport): 35" (H) x 28" (W) x 23" (D)

12" TWO-WAY SPEAKERS
Speaker Input: Speakon style connector (pin 1+ = +, pin 1- = -)
Loudspeaker: 12" Custom Built B-52 Transducer
Compression Driver: 1" Exit Titanium Diaphragm on Constant Directivity Horn
HF Dispersion: 90 x 40
Nominal Impedance: 4 Ohms
Active Freq. Response: 120 20K Hz
Crossover Frequency (passive): 2K Hz 12 dB/Octave
Maximum SPL: 126 dB
Weight: 40 lbs.
Dimensions (Upright): 23" (H) x 14" (W) x 13" (D)

COMPLETE SYSTEM
Weight: 245 lbs
Dimensions (Transport): 47" (H) x 24" (W) x 28" (D)

Approximate Weight 110.0kg

Related Products

B-52 MATRIX-1000V2 700W Powered Portable PA System
$2,299.00 | more