SHURE KSM42 Dual-Diaphragm Side-Address Studio Vocal Microphone

SHURE KSM42 Dual-Diaphragm Side-Address Studio Vocal Microphone
Price: $1,499.00
Finance - $13.71 weekly (36 mths) | show more
Qty:
Other Finance Options
  •  6 Months - $63.82 weekly
  • 12 Months - $33.64 weekly
  • 18 Months - $23.62 weekly
  • 24 Months - $18.64 weekly
  • 36 Months - $13.71 weekly
Apply Online in 5 Minutes

During the checkout process, select Finance as your payment method.
Fill out the form and we will do the rest. If you are approved we will then arrange the finance paperwork for you to sign.

Full details about our finance.

Shure

SHURE KSM42 Large Dual-Diaphragm Side-Address Condenser Studio Vocal Microphone

Premium cardioid condenser microphone with capsule ideal for world-class vocal recording.

Shure KSM Microphones – Premium Microphones with refined and sophisticated components that capture the world’s most accomplished studio and live performances.

Recommended Uses - Studio Vocals & Live Vocals

This premium side-address, cardioid condenser microphone features a large dual-diaphragm capsule, optimized for world-class vocal recording and performance applications. With a tailored frequency response and extensive internal and external pop filtering, the single-pattern, dual-diaphragm design of the KSM42, featuring Prethos™ Advanced Preamplifier Technology exhibits an exceptionally smooth proximity control and ultra-wide dynamic range. The KSM42 is the premier choice for capturing sophisticated, powerful and intimate vocal performances.

A milestone achievement in sound reinforcement, Prethos™ Advanced Preamplifier Technology employs transparent internal circuitry architectures that enable unprecedented audio quality and performance.

Features
 
* Highly consistent cardioid polar pattern creates a broad “sweet spot” and natural off-axis response
* Prethos™Advanced Preamplifier Technology exhibits extremely low self-noise with superior dynamic range, transient response and ultra-low distortion for transparent recording
* Dual-diaphragm design with an active front, ultra thin (2.5 micron) 24-karat gold, low mass, 1-inch Mylar® diaphragm
* Passive back diaphragm delivers exceptional control of low frequency proximity effect
* Tailored low-frequency roll-off minimizes low frequency room noise
* Integrated three-stage mesh grille guards against wind and breath noise
* Open cage ShureLock® rubber suspension shock mount with low-profile Popper Stopper™  magnetic pop filter produces a natural space between performer and microphone
* Extremely low self noise for critical studio vocal recording
* Premium electronic components and gold-plated internal and external connectors
* Durable zinc die-cast housing and hardened low carbon steel grille
* Internal shock mount to reduce unwanted handling and stand noise

Specs

Cartridge Type
Dual-Diaphragm, Front-Active, Externally Biased Condenser

Frequency Response
60 to 20,000Hz

Polar Pattern
Cardioid

Output Impedance
147 Ω

Sensitivity (at 1 kHz, open circuit voltage)
−37 dBV/Pa (14.1 mV)
1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD)
1000 Ω load: 139 dB
2500 Ω load: 139 dB
THD of microphone preamplifier when applied input signal is equiva¬lent to cartridge output at specified SPL

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
86 dB
S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

Dynamic Range (at 1 kHz)
1000 Ω load: 131 dB
2500 Ω load: 131 dB

Common Mode Rejection (10 Hz to 100 kHz)
> 60 dB

Clipping Level (20Hz-20 kHz at 1% THD)
1000 Ω load: 6.5 dBV
2500 Ω load: 8 dBV

Self Noise (typical, equivalent SPL, A-weighted)
8.5 dB

Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight
Net: 494 g
with shock mount and pop filter: 820 g

Connector
Three-pin professional audio (XLR), male

Power Requirements
11 to 52 Vdc phantom, 6 mA
 

Accessories
 
A42VB
 
Protective Velveteen Pouch. Works with KSM42.
 
A42SC
 
Aluminum Carrying Case. Works with KSM42 and KSM44A.  
 
A42SM
 
ShureLock® Rubber Suspension Shock Mount. Works with KSM42.  
  
A42PF PopperStopper™ Magnetic Pop Filter
 
Attenuates unwanted breath noise and plosives. Works with KSM42.
  
A42OR
 
Set of 4 Suspension Mount O-Rings for use with KSM42.

Approximate Weight 3.0kg

Related Products


items:
total:




  Keep in Touch
 Join our newsletter