JBL EON 15P Powered 15" Speaker

JBL EON 15P Powered 15" Speaker

JBL

High performance powered 15" speaker (original model) with integrated amplifier, suitable for clubs, bands, DJs, schools, etc.

System Application:

Live sound reinforcement, speech, vocals, and music playback in entertainment, A/V, and institutional venues – especially when ease of use, audio quality and portability are important factors. Amplification and monitoring for electronic musical instruments.

Key Features:

  • 15" Differential Drive® low-frequency driver with neodymium magnet for light weight and reduced distortion.
  • 1" (throat diameter) JBL compression driver with 1.75" titanium diaphragm and ferrofluid cooling.
  • Internally Bi-amplified – 130 watts low frequency and 50 watts hi-frequency (bi-amplified) – actual power delivered to the drivers.
  • Balanced, Mic/Line switchable, XLR input.
  • Loop-through XLR output. “Daisy-chain�? additional EON speakers.
  • 90° x 60° (nominal) constant directivity horn.
  • Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat sink. Air movement in the finned ports dissipates heat – no internal or external cooling fans are required.
  • Rugged, lightweight (47 lbs.), co-polymer enclosure.
  • Integral 35 mm pole mount receptacle with securing thumbscrew.
  • Multi-angle enclosure for front of house or stage monitor application.
  • Integral attachment points for optional JBL and third-party mounting brackets.

Specifications

Freq. Range (-10 dB): 47 Hz - 18 kHz
Freq. Response (±3 dB): 65 Hz - 16 kHz
Horz. Coverage (-6 dB): 90° Nominal
Vert. Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 127 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in)
Net Weight: 21 kg (47 lbs)
LF Driver: Integral frame with 15" (380 mm) driver, neodymium magnet, 2" Differential Drive voice coil.
HF Driver: JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm. Ferro-fluid cooled.
Amplifier Power LF: 130 watts @ low-frequency driver impedance, <.1% THD.
Amplifier Power HF: 50 watts @ high-frequency driver impedance, <.1% THD.
Input Sensitivity: -55 dBu to -2 dBu for rated output (Mic/Line switch in MIC position) +9 dBu to +26 dBu for rated output (Mic/Line switch in LINE position)
Enclosure Material: Aluminum baffle, gray co-polymer enclosure and protective bezel
Audio Connectors: Input XLR/F, balanced LoopOut XLR/M, balanced
Crossover Freq.: 1.5 kHz.
AC Input: Switchable 115 - 230 VAC (±10%), 50 - 60 Hz.,
175 watts rating per UL, detachable IEC (male) power connector.

Approximate Weight 0.0kg

Related Products


items:
total:




  Keep in Touch
 Join our newsletter