Aiaiai
Akai
AKG
Alesis
Allen & Heath
Audio Innovate
Audio-Technica
Australian Monitor
Avid
B&W
B52
Beats by Dre
Crane Hardware
Crown
dbx
Denon
Digidesign
DMC
Exact Science
Gemini
IK Multimedia
Imaginary Foundation
JBL
Korg
Lexicon
Martin
MidiTech
Monster
Native Instruments
Novation
Numark
Ortofon
Pioneer
Proel
QSC
Quest
Rane
Road Ready
Sennheiser
Serato
Shure
Sicmats
Stanton
Tascam
Technics
Thud Rumble
UDG
Ultrasone
Vestax
Wharfedale-Pro
ORTOFON CONCORDE ELEKTRO Twin Cartridge Set with Case
New model professional plug-in cartridge suited for general DJ use. The Elektro features improved construction and higher output. Kit includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE ELEKTRO KIT WITH 2 STYLI
Ortofon has been a world leader in the DJ cartridge for many years now. Their new Elektro cartridge is of the same standard as all their previous cartridges. The Elektro boasts an extremely robust sound, increased tracking ability and an output level over 7mv. To make this cartridge even more resistant against constant handling and heavy use, they have made the rubber suspension of the cantilever even more rigid against axial pull. This is a superb all round cartridge for all styles of music!! (Tone arm mounted).
The Ortofon DJ cartridges offer a clear visible cantilever with a red stylus point, which makes it easier to locate the stylus in the groove. This robust cartridge has been provided with a special telescopic cantilever construction consisting of a double tube design where the diameter of the outer tube at the same time has been raised from 0.7 to 0.8 mm.
. Output voltage at 1000 Hz, 5cm/sec. 7,5 mV
. Channel balance at 1 kHz 1,5 dB
. Channel separation at 1 kHz 25 dB
. Channel separation at 15 kHz 15 dB
. Frequency range at - 3dB 20-22.000 Hz
. Frequency response 20-15.000 Hz +3 / -2 dB
. FIM distortion at recommended tracking force, DIN 45.542 < 1%
. Tracking ability at 315Hz at recommended tracking force 80 µm
. Compliance, dynamic, lateral 6 µm/mN
. Stylus type Spherical
. Stylus tip radius R 18 µm
. Equivalent stylus tip mass 0,6 mg
. Tracking force range 3,0-5,0 g (30-50 mN)
. Tracking force, recommended 4,0 g (40 mN)
. Tracking angle 20°
. Internal impedance, DC resistance 750 Ohm
. Internal inductance 450 mH
. Recommended load resistance 47 kOhm
. Recommended load capacitance 200-600 pF
. Cartridge colour, body/stylus White/White
. Cartridge weight 5 g
Approximate Weight 0.3kg
Related Products
