ORTOFON CONCORDE DJS TWIN CARTRIDGE SET with Case & Brush

Categories

Brands

ORTOFON CONCORDE DJS TWIN CARTRIDGE SET with Case & Brush

Select :
Qty:

ORTOFON CONCORDE DJS KIT WITH 2 STYLI (SPHERICAL)

Professional plug-in carridge suited for general DJ use. Set includes two cartridges with two styli, cleaning brush and new style carry case.

DJ's all over the world claim very high demands to their professional equipment, among which the cartridges ``plays" their decisive part by realising the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme soundpressure and vibration.

Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.

The OrtofonPro cartridges were the first to combine the unrivalled Ortofon sound quality with the ruggedness that is a must for professional use. Many years of experience from producing disco cartridges, and a close contact to DJ's, have resulted in several lines suitable for all tonearms and all amplifiers. The Ortofon disco cartridges are available in 1/2 inch versions for mounting in standard headshells or in the elegant integrated Ortofon Concorde design - for direct mounting in tonearms with standard sockets. For easier cueing, the nose of all the Ortofon disco cartridges has an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.

Concorde Concorde DJ E KIT Concorde DJ S
Weight 18.5 gram 18.5 gram
Colour: Body
Stylus Unit Blue
Blue Blue
Blue
Stylus (diamond shape)
Stylus tip radius
Equivalent stylus tip mass
Replacement stylus unit
Elliptical
13 x 25 µm
0.6 mg
DJ E Spherical
18 µm
0.6 mg
DJ S
Tracking angle (vertical)
Tracking force range
Tracking force (recommended)
Tracking ability at 315 Hz (lateral) 20°
20-40/2.0-4.0 mN/gram
30/3.0 mN/g
80 µm 20°
20-40/2.0-4.0 mN/gram
30/3.0 mN/g
80 µm
Compliance, dynamic (lateral) 9.9 µm/mN 9.9 µm/mN
Frequency response 20-22,000 Hz 20-18,000 Hz
Output voltage 1 kHz (5 cm/sec) 6.0 mV 6.0 mV
Channel separation at 1 kHz
Channel balance at 1 kHz 23 dB
2 dB 23 dB
2 dB
Internal resistance
Inductance
Recommended load impedance
Recommended load capacitance 750 Ohm
450 mH
47 kOhm
200-600 pF 750 Ohm
450 mH
47 kOhm
200-600 Pf